QRT 5
The QRT 5 is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter.
Inside is the high power RB911 dual chain wireless device (see separate brochure), with high performance, high output power wireless transmitter. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11n high speed wireless.
Easy to use and quick to deploy, QRT is ideal for point to point links.
Product specifications
| Details |
|---|
| Product code | RB911G-5HPnD-QRT |
| CPU nominal frequency | 600 MHz |
| CPU core count | 1 |
| Size of RAM | 64 MB |
| 10/100/1000 Ethernet ports | 1 |
| Wireless chip model | AR9342 |
| Wireless standards | 802.11a/n |
| Supported input voltage | 8 V - 30 V |
| PoE in | Yes |
| Voltage Monitor | Yes |
| PCB temperature monitor | Yes |
| Dimensions | 309x320x50mm |
| Operating System | RouterOS |
| License level | 4 |
| Antenna gain DBI | 24 |
| CPU | AR9342 |
| Max Power consumption | 11W at 24V |
| Number of chains | 2 |
| Storage type | NAND |
| Storage size | 128 MB |
| Suggested price | $169.00 |
Wireless specifications
| 5 GHz |
|---|
| TX | RX |
|---|
| 6MBit/s | 30 | -96 |
| 54MBit/s | 27 | -78 |
| MCS0 | 30 | -96 |
| MCS7 | 26 | -75 |
wireless parameters may be limited in software, depending on your local regulatory limitations
Included parts
Performance test results
| RB911G-5HPnD-QRT | AR9342 1G 1 port test |
| Mode | Configuration | 1518 byte | 512 byte | 64 byte |
| kpps | Mbps | kpps | Mbps | kpps | Mbps |
| Bridging | none (fast path) | 81.0 | 983.7 | 232.0 | 950.3 | 269.6 | 138.0 |
| Bridging | 25 bridge filter rules | 81.0 | 983.7 | 86.0 | 352.3 | 87.6 | 44.9 |
| Routing | none (fast path) | 81.0 | 983.7 | 210.0 | 860.2 | 226.9 | 116.2 |
| Routing | 25 simple queues | 81.0 | 983.7 | 103.9 | 425.6 | 106.6 | 54.6 |
| Routing | 25 ip filter rules | 56.8 | 689.8 | 59.6 | 244.1 | 60.5 | 31.0 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
24V 0.8A power adapter
QRT antenna mount
PoE injector
U bolts
U mast clamp
K-QRT screw kit